Welcome to the W.L. May Company Blog.
Offering information and fun for the appliance repair industry and interested do-it-yourselfers since 2013.

To shop for appliance parts visit our Main Page
Phone: 1-800-377-8881
Email: Sales@WLMay.Com

Showing posts with label Troubleshooting. Show all posts
Showing posts with label Troubleshooting. Show all posts

Tuesday, September 22, 2015

Kelly's Korner - Dishwasher Dilema Part Deux

Hey, All,

Last week I wrote about the issues I was having with my dishwasher.  Water was not coming into the tub and my dishes were not getting clean.

So I talked to one of my favorite techs, Patrick, and watched a couple of troubleshooting videos on it and pulled up my big girl panties to go home and see what I could find.

When I got home I opened the dishwasher - yup, still dirty dishes! - and took the bottom rack out and set it on the floor.  Then I gently grasped the float (that's the white round dome thing in the corner of your dishwasher floor) and carefully raised and lowered it listening for a click.  The float works kinda like the float in your toilet tank - once there is enough water to float the float, a switch below clicks off to shut off the water flow into the tub.  I heard it click!  Yahoo!  If it didn't click then I had Patrick on speed dial.


So then I closed the door and turned it on for about half a minute - it was running....  So I opened the door and looked to the side and bottom of the tub to see if there was water coming into the tub - THERE WAS!!!!

OK, so now I'm totally confused, right?  There hadn't been any water coming into it before and now there is?  What's up with this?  So I put the bottom rack back in, put in detergent, closed the door and let it run.  Guess what?  I had clean dishes!

On one hand, I'm glad that Patrick didn't have to come over and do a more thorough diagnosis and that I wasn't going to have to pay for a repair.  On the other, I was totally frustrated that after all the worry and whatever, the darned thing was working again!  I told Patrick I think I scared it into working again by threatening it that he was going to come over and tear is apart if it didn't behave.  He thinks I may have had a stuck float switch and me fiddling with it got it working again.  Have you ever had something go wonky and when you get it to the repair person, it runs fine?  ARGH!

So now I have clean dishes and no repair bills, but I think I need to make Patrick some cookies for being there for me.

Hope all your dilemas are as easily solved!

K

Tuesday, April 30, 2013

Kelly's Korner - Dryers

Hey, All!

Well, I'm back from vacation and rested and raring to go!

So, I was thinking about the most popular call I get from the do-it-yourselfers and that has to do with their dryers.  You'd think that this appliance would be a simple one to diagnose and fix but it's not.  The most popular of these calls is "My dryer is not heating so I need a new element."  Chances are your element is fine and there are several things to look at before you go spending your hard-earned dollars on something you may not need - and once hooked up is not returnable.

Remember to unplug your dryer before starting any work on it!

First of all, check your breaker box - dryers run on 220 volts and have two breaker switches.  The motor will still run on 110 but not heat.  Make sure both your breakers are on.

Next, check your element (unplug machine first!) - if you can see that the coils are broken/burned, then you will need a new element.  If the coils look fine then you're in for some deeper diagnoses.

Remember to unplug your dryer before starting any work on it!

Dryers have several thermostats (thermal fuse, high limit, thermistors, cycling thermostat, cut-off thermostat are just some of the descriptions of these) and can be located in several places - element housing, blower housing, back panel of dryer, front panel of dryer - it depends on the style and brand.  If this seems too complicated, now is the time to call your favorite appliance repair man.

And while you are waiting for him, now is the time for a little cleaning (and this needs to be done monthly).  Unplug your dryer and pull it away from the wall.  Clean all lint and anything else behind it  (oh, wow!  there are some of the socks you're missing!).  Unhook your venting, reach in the dryer duct and pull out any lint.  If this is really clogged this is probably the reason your dryer quit heating - no air flow and it blew a thermostat.  Then check your venting from the dryer end to the outside.  W L May sells all kinds of brushes to help clean these out.  You also may have some type of nature that has built a nest in the outside vent - nice warm, cozy place to help incubate those eggs!  W L May also has devices that will prevent unwanted tenants.

If you are confidant on your repair abilities, you can test for continuity on the thermostats with a multi-meter, or bring them in and we will test them for you.  Please bring your model number with you.  If everything tests fine then you definately need to call your repairman - there is something else that needs attention.  While he is there he should also check and make sure all components are in good working order - belt, rollers, pulleys, felts - to help your dryer to last longer.

Of course, with nice weather you can always use nature to dry your clothes - so string that clothes line and get out the clothes pins.  Personally, I love the way my clothes smell when dried outside and I like the scratchier feel of my towels.  If you don't, then use fabric softener in your rinse cycle.

Oh, and if you want some things to do with that lint that you clean out?  Makes for great firestarter (THE number one reason cleaning your dryer regularly is important - lint is highly flamable!) for campfires and fireplaces, use it to stuff pillows or stuffed animals with - it is already clean and smells good from the dryer sheets.  Or if you are really artistic, I've seen some pictures on the Web of people who have used it for art projects - like a reproduction of The Last Supper!  Wow!

Have a great week!