Welcome to the W.L. May Company Blog.
Offering information and fun for the appliance repair industry and interested do-it-yourselfers since 2013.

To shop for appliance parts visit our Main Page
Phone: 1-800-377-8881
Email: Sales@WLMay.Com

Showing posts with label D-I-Y. Show all posts
Showing posts with label D-I-Y. Show all posts

Thursday, May 23, 2013

Truck Stock Thursday: Frigidaire Dryer Maintenance Kits


Did you know that for Kenmore dryers with model number starting with "417", Frigidaire, Westinghouse, Gibson, or Tappan dryers made from 2002 to present there's a repair kit from Electrolux that is worth stocking? There is also a kit for older machines in those brands as well. Not only do these kits provide a convenient assortment of parts needed for maintenance service on these dryers, but they offer an exceptional value. The kits shave about a third of the cost off of what you would pay buying the parts individually.

For the newer models, your part number is 5304457724, this kit includes a new drive belt (134503600), rear drum bearing kit (5303281153), idler pulley/bracket assy (131863007), front drum support/seal (5303937182), lower front felt seal (5303937183), the special high temp adhesive to install the front parts, the high temp grease for the rear bearing assy, and really nice photo instructions that'll walk a do-it-yourselfer through the whole job.

On Models from 1992-2002 the kit is part number 5304461262. It includes a new drive belt (134503600), rear bearing kit (5303281153), idler arm & pulley (131863000), upper drum glide (5303937139), lower drum glide (5303283286) and instructions.


Tuesday, May 14, 2013

KELLY'S KORNER - HOMEMADE LAUNDRY SOAP

Hey, All!

I was going through some stuff I have stored in my computer and came across this recipe for homemade laundry soap.  I will state right now that I don't remember where I got it and if I am stepping on someone's copywrite, I apologize.  But I thought this was a great idea.  With all the additives and fragrances and stuff that is added to store bought detergent, this is a great alternative.  And I just bought a box of Borax for ant bait (amazing the things you can do with this stuff!), so I think I will mix some up.


Ingredients:
1 Bar of shaved soap (Ivory or Fels-Naptha)
1 Cup of 20 Mule Team Borax
1 Cup Arm & Hammer Washing Soda

Grate the bar soap finely and place in a gallon size container. (Use a fine cheese grater or something similar) Add borax and washing soda. Thoroughly stir together for 5 minutes and enjoy the results. Stirring the full time is important; it breaks up the pieces and mixes it fully.
 For washing, use 1 tablespoon per load. If you are washing heavily soiled items, use 2 tablespoons. Makes enough for up to 64 loads!!! Safe to use in High Efficiency/Front-Load washers.

Place in an air-tight container and store at room temperature.
If you are looking for a fabric softener alternative, try using 1/2 cup of white vinegar in your rinse cycle. It strips the clothes of any leftover soap residue and makes them smell clean. Not that bottled clean smell that we are all used to, but a real, deep-down clean. And no, it doesn't make your clothes smell like vinegar.

The great thing about this is that you only use 1 Tablespoon per load!  And you can use it in your high efficiency washers - that detergent is hard to find sometimes.  Then forgo the dryer and hang them outside to dry - now don't you feel "green"?

Have a great week!

PS:  omg, this is so cool!  I was Googling Ivory soap and there was a Youtube "science" experiment where you put a bar of Ivory soap in the microwave for about 90 seconds - the air bubbles expand and when done looks like a plate of solid soap bubbles!  This crumbles really well and I'm thinking that this might be more fun than grating the bars.

Tuesday, April 30, 2013

Kelly's Korner - Dryers

Hey, All!

Well, I'm back from vacation and rested and raring to go!

So, I was thinking about the most popular call I get from the do-it-yourselfers and that has to do with their dryers.  You'd think that this appliance would be a simple one to diagnose and fix but it's not.  The most popular of these calls is "My dryer is not heating so I need a new element."  Chances are your element is fine and there are several things to look at before you go spending your hard-earned dollars on something you may not need - and once hooked up is not returnable.

Remember to unplug your dryer before starting any work on it!

First of all, check your breaker box - dryers run on 220 volts and have two breaker switches.  The motor will still run on 110 but not heat.  Make sure both your breakers are on.

Next, check your element (unplug machine first!) - if you can see that the coils are broken/burned, then you will need a new element.  If the coils look fine then you're in for some deeper diagnoses.

Remember to unplug your dryer before starting any work on it!

Dryers have several thermostats (thermal fuse, high limit, thermistors, cycling thermostat, cut-off thermostat are just some of the descriptions of these) and can be located in several places - element housing, blower housing, back panel of dryer, front panel of dryer - it depends on the style and brand.  If this seems too complicated, now is the time to call your favorite appliance repair man.

And while you are waiting for him, now is the time for a little cleaning (and this needs to be done monthly).  Unplug your dryer and pull it away from the wall.  Clean all lint and anything else behind it  (oh, wow!  there are some of the socks you're missing!).  Unhook your venting, reach in the dryer duct and pull out any lint.  If this is really clogged this is probably the reason your dryer quit heating - no air flow and it blew a thermostat.  Then check your venting from the dryer end to the outside.  W L May sells all kinds of brushes to help clean these out.  You also may have some type of nature that has built a nest in the outside vent - nice warm, cozy place to help incubate those eggs!  W L May also has devices that will prevent unwanted tenants.

If you are confidant on your repair abilities, you can test for continuity on the thermostats with a multi-meter, or bring them in and we will test them for you.  Please bring your model number with you.  If everything tests fine then you definately need to call your repairman - there is something else that needs attention.  While he is there he should also check and make sure all components are in good working order - belt, rollers, pulleys, felts - to help your dryer to last longer.

Of course, with nice weather you can always use nature to dry your clothes - so string that clothes line and get out the clothes pins.  Personally, I love the way my clothes smell when dried outside and I like the scratchier feel of my towels.  If you don't, then use fabric softener in your rinse cycle.

Oh, and if you want some things to do with that lint that you clean out?  Makes for great firestarter (THE number one reason cleaning your dryer regularly is important - lint is highly flamable!) for campfires and fireplaces, use it to stuff pillows or stuffed animals with - it is already clean and smells good from the dryer sheets.  Or if you are really artistic, I've seen some pictures on the Web of people who have used it for art projects - like a reproduction of The Last Supper!  Wow!

Have a great week!

Friday, April 26, 2013

Fix It Friday: Whirlpool Direct Drive Washer


If you are a professional appliance repair person, you should already be VERY familiar with the Whirlpool Direct Drive washer. This video is for the do-it-yourselfers out there. Technician Mike shows how to open a cabinet, how to remove a motor and how to replace a coupler. Whirlpool has stopped manufacturing this machine. There are still a lot of them out there though, but it is true we don't get as many requests for couplers as we once did.

Friday, April 12, 2013

Factory Friday: Whirlpool Ignition and Reignition


Whirlpool posted this video talking about electronic ingnition and their automatic reignition ranges. It covers a few common problems that can occur and easy steps that the homeowner can take to keep their range functioning properly.

Wednesday, April 10, 2013

Watch this Wednesday: GE Refrigerator Repair

Today we feature another video from our old friend, the Appliance Samurai. In this video, we get to watch as he troubleshoots and fixes a side by side GE refrigerator that isn't cooling. We hope some of you will find this information to be useful.

Friday, March 22, 2013

Food Friday-Refrigerator Safety

Usually when there is a consumer reports TV news story that relates to appliances, I don't approve. Frequently, they will find a company that is a disgrace to the industry and then make the whole service industry look like a bunch of crooks. This is a little better balanced piece about "dorm size" refrigerators and their limitations. If you would like to test your own refrigerator, W.L. May stocks a variety of thermometers to help you out.

Tuesday, February 26, 2013

Tuesday Tips: Refrigerator Door Gasket Replacement

Like any industry, the world of appliance repair has several training conferences and conventions each year. A regular attendee at these events is the Fred's University. Fred's University is a complete training program for aspiring technicians. On his blog he shares how to replace a gasket on a refrigerator door. From the article: "For most refrigerators, all you need to get started is a replacement seal, a screwdriver and a wrench."

Tuesday, February 19, 2013

Set Up an Efficient Laundry Room

Came across this tip filled article on Twitter. Thanks to Appliance Specialists, LLC for sharing it. From the article:
Few moments are more absurd than the times you beg your loved ones for their dirty laundry. That's why you should put a few receptacles in strategic locations that will make transporting and sorting clothes easier, says Linda Cobb, author of Talking Dirty Laundry With the Queen of Clean.

Tuesday, February 12, 2013

Truck Stock Tuesday: Linteater

Here's an item that not only makes a great truck stock item, but is also a good tool for the do-it-yourselfer. The Linteater duct cleaning system is a great way of cleaning lint from dryer ducts, which is important since lint filled vent lines can be a major fire hazard.
Servicers, this is an easy way to increase your invoice while providing a valuable service to your customers. DIY folks, this is important maintenance and can save you the cost of hiring a repairman to do the job for you. In addition to dryer ducts the manufacturer recommends using the Linteater to clean baseboard heaters, under appliances, pellet stove vents and even gutter downspouts!

Tuesday, February 5, 2013

Tuesday Tips: Range Hood Filters

Did you know? There are a wide variety of grease filters used on range hoods. We stock many of them in the most common sizes. Just call us with the dimensions, including the thickness of the filter. If the filter you are looking for is an unusual size, we can have them made to order to meet your needs.